Datamation Group
of Companies

enquiries
 
home
|  about us  |  products & services  |  what's new  |  job opportunities  |  contact us  |  location  |
[  Pre-press System  ] |   ↵ back   |
 
  Business IT Solutions
Business Process Management
Forms Processing Systems
Document Management Systems
 Pre-press &
 Publishing Systems
Pre-Press System
Digital Asset Management
Content Management
Digital Proofing System
 Electronic Ads
 Delivery System
General
Sender Receiver
  Leisure & Recreation
Emerald Golf and Country Resort
 
 
|   InfraLogic  |   K&F  |   KrauseCTP  |   Presteligence  |   TECSA  |
the official website: www.tecsa.com
  TS5200     Tecsadot copydot software
  – TS5200 Copydot Scanner –
Operation Flatbed, document face down
Media
Positive or negative film or paper, screened halftones, line art, colour separations. Maximum - 3mm thickness
Image scan area 660 mm (25.9 inches) x 475 mm (18.0 inches)
Output resolution Up to 2540dpi (100 lpm) maximum over full bed
Scans per hour Up to 2540dpi (100 lpm) maximum over full bed
 TS5204 20 x A4+ (300 x 240 mm) 2540
14 x A3+ (450 x 330 mm) 2540 dpi
28 x Tabloid (400 x 310 mm) 1270 dpi
20 x Broadsheet (610 x 390) at 1270 dpi
 TS5205 16 x A4+ (300 x 240 mm) 2540
11 x A3+ (450 x 330 mm) 2540 dpi
24 x Tabloid (400 x 310 mm) 1270 dpi
16 x Broadsheet (610 x 390) at 1270 dpi
Technology Moving head, multiple linear CCD arrays
Interface Differential SCSI-3 (PCI bus card supplied)
Environment 20 deg. C +/- 5C, 20%-80% humidity non-condensing
Power 230VAC, 50/60 Hz, 2 Amp; 115VAC, 50/60 Hz, 4 Amp
Width 737 mm (29.0 inches)
Length 1190 mm (47 inches)
Weight 70 kilos (155 lbs)
 TS5000 Software (supplied with scanner)
 SCANNIT 5 with Easyscan and Easyalign
 Toolkit for hardware setup and calibration
 TS5000 Windows PC Platform
The current recommended PC to interface to the TS5000 scanner and run Scannit software is a Pentium 2.4 Ghz, 60GB 7200rpm hard disk, 1 GB memory
The basic PC specification above is the specification of PC that TECSA has tested and recommends for good performance and functionality.
 It is recommended that you contact TECSA and request the latest detailed
* Specification.Specifications are subject to change without notice
 
  Copyright © 2007 Datamation (M) Sdn. Bhd. All rights reserved. |   ↵ back   |   ⇑ top   |