– Vision Punch Bender –  ProVision Alliance A full-featured punch bender that is simple to operate, compatible with all plate types and all CTP platesetters, has clear top covers for viewing plate production, also includes Vision and Edge-Register Systems.  ProVision V - Series A Single-Stage Automatic In-Line Punch Bender excellent choice for CTP. Complete PC controlled bender, with a complete communication system, TecSet and TecTrac.  UPB–Model 1 Universal Punch Bender capable of automatically producing press-ready plates for multiple presses.  Vision Bender Model 2 Single-Stage Automatic In-line Vision Punch Bender for single and doublewide plates with vision registration and capable of 240 single plates per hour.  VIPB–3–SD Semi-Automatic Vision Punch Bender for Conventional or CTP plates. Uses vision to register targets, punches and bends in one stage.  VIPB–2–E Series Edge Register Single-Stage Punch Bendersu An excellent compliment to any CTF or CTP engine. The VIPB-2-E edge registration accurately matches any CTP registration system while producing 240 SW and 200 DW plates / hr.  CSS–1 CTP Plate Slitter Station, versatility and speed for commercial and newspaper CTP lines.
| Vision Bender Accessories | – Inline Benders –  AB–7000 Automatic In-line power bender for singlewide plates. Plates are pin registered, held by vacuum. Capable of 360 plates per hour.  AB-8000 (Asia) A two-stage automatic bender capable of 360 plates per hour with a max bend of 432mm. Registration optimizer system confirms the accurate location of the plate.  AB–5Q (Asia) A single stage automatic in-line bender. Capable of 180 plates per hour with a max bend of 813mm.  AB–5S (Asia) A single stage automatic in-line bender. Capable of 180 plates per hour with a max bend of 432mm.

 PDS K&F's Plate Delivery Systems automate movement of plates from the plate room to the press. The PDS can reduce the costs associated with manual delivery of plates by hand or carts. – Conveyors –  CD-H Straight conveyor for single or doublewide plates with hinged section for pass through. Variable length models available.  UTM Universal Transition Module accepts single or doublewide plates and turns them right, left or straight to other conveyor units or to other machines. – Stackers –  MULTI-WAY STACKERS Plate Separation stackers for use with benders

 EPB A free-standing Edge Register Punch Bender for single or doublewide plates. For use with CTP.  VPB Video Punch Bender for single or doublewide plates. Plates are video registered then punched and bent.  PB-30 & PB-38 Semi-automatic Power Bender for single and doublewide plates. Plates are manually loaded and then power bent.  SAB-30 & SAB-38 Semi-Automatic Bender for single or doublewide plates. Manually loaded, pin registered and vacuum held during bend cycle. – Plate Punches –  AP-200 Automatic plate punch for singlewide plates. 200 plate capacity of (.008" / .012" thickness) Electrical contacts engage pneumatically operated punches.  AP-1000 Automatic plate punch for singlewide plates. 1000-plate capacity of (.008" / .012" thickness) Electrical contacts engage pneumatically operated punches.

– Exposure Units –  Twinline A semi-automatic exposure unit for single and doublewide plates with 8Kw light source, pin registration, two up formats and two platens. Inline for conveyor line systems.  Twindrawer The TwinDrawer is a manually loaded and unloaded exposure unit.  Plate Express-II Plate Express II is the base model of high-quality plate high volume exposure units from K&F. It's the affordable answer for users who require more automation than the Twin Line but less than the Plate Express. The Plate Express II can be configured to run single wide or double-wide plates (not both) and will automatically expose 240 single-wide as well or 120 double-wide plates per hour.  Plate Express-III An automatic exposure unit for single and doublewide plates with 8Kw light source. Capacity 400 plates loaded from carts and 20 sheets of film. CE approved. Inline for conveyor line systems.  Plate Express-IV ASIA – An automatic exposure unit for singlewide plates with 8Kw light source and color registration. Up to 200 plates and 25 sheets of film loaded. Plate can be trolley loaded. Material sizes: Single wide 1 page long by 2 pages wide 406mm x 1,143mm. Plate Express-IV-Q for quad plates. Material sizes: Double wide 2 pages long by 2 pages wide. 813mm x 1,143mm.  Plate Express-VI ASIA – An automatic exposure unit for singlewide plates with 8Kw light source and color registration. Plates and film are manually loaded with automatic movement to processor. Material sizes: Single wide 1 page long by 2 pages wide 406mm x 1,143mm. Plate Express-VI-Q for quad plates. Material sizes: Double wide 2 pages long by 2 pages wide. 1,270mm x 860mm.  Blank Plate Mode A feature to the Plate Express series allowing to make blank plates automatically by the push of a button.

– Film Punches –  PP-S A manual prep punch for film or Mylar.  PP-D A manual prep punch for film or Mylar.  NP A manual film punch, tabletop, with light, vacuum, pin or butt registration.  NPD A manual film punch, tabletop, with light, vacuum, pin or butt registration.  NPP A power-film punch using an air punch head. Cabinet mounted with light, vacuum, pin or butt register.  NPPD A power-film punch using an air punch head. Cabinet mounted with light, vacuum, pin or butt register.  AOP-AF Automatic Optical Film Punch for both positive and negative film with auto feed capabilities up to 100 pieces.  AOP-IL In-line Automatic Optical Film Punch for both positive and negative film with auto feed capabilities up to 100 pieces.  AVP-F An automatic vision punch for film with accuracy of .001" (.025mm). Incorporated the same Vision system as the VIPB series bender punches.  AVP-VF An automatic vision punch for variable film sizes. Incorporated the same Vision system as the VIPB series bender punches. Can store up to six positions in its memory. – Verifiers –  VRV-II Video-register verifier to inspect single and doublewide plates for accuracy and registration. – Press Registration Systems –  SADDLES AND SHIMS Configured for all presses, solid aluminum design, permanent ceramic magnets, fully reversible with no modifications and designed for both tension and compression press lockups.  LOCKUPS Plate Registration Lockups for offset web presses, such as Goss Metro, Urbanite, Cosmo, Community, Headliner, Colorliner, Harris 1600 series, 1700 series, 845 series and others. Custom locks, and web reductions are available.